Limited Editions
You're in luck!! All of these fragrances were brought in by our SSS - ISO Facebook group and are Limited Editions. Once they're gone we won't bring them in again until another group buy opens up.
A luxe fragrance that mirrors high end men's cologne. Elegant and powerful, it blends together deep leather and rich cedar notes.
* Compare our fragrance to Suede Blanc® by Voluspa
Flashpoint: 180° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
IFRA Maximum Skin Exposure Levels:
Soap: 50.71% | Body Wash: 50.71% | Bath Bombs: 50.71% | |||
Body Lotion: 0.02% | Body Scrub: 50.71% | Candles: 100% | |||
Perfume: 0.02% | Deodorant: 0.02% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Voluspa.
Treat yourself with this delightful fragrance that illustrates the sweetness of sugar apples with soft touches of vanilla.
* Compare our fragrance to Sugared Apple by Yankee Candle.
Flashpoint: >200° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
IFRA Maximum Skin Exposure Levels:
Soap: 13.89% | Body Wash: 13.89% | Bath Bombs: 13.89% | |||
Body Lotion: 8.40% | Body Scrub: 13.89% | Candles: 100% | |||
Perfume: 5.04% | Deodorant: 1.68% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Yankee Candle.
Description: This fragrance is a warm inviting fruity, spicy and gourmand scent with a warm base of golden amber, vanilla and a hint of rum.
* Compare our fragrance to Sweet Cinnamon Pumpkin® by Bath & Body Works.
Flashpoint: >200° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalate Content: Contains Phthalates
IFRA Maximum Skin Exposure Levels:
Soap: 1.61% | Body Wash: 1.61% | Bath Bombs: 1.61% | |||
Body Lotion: 1.61% | Body Scrub: 1.61% | Candles: 100% | |||
Perfume: 1.61% | Deodorant: 0.65% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
Description: A sweet fragrance that evokes the delightful aroma of strawberries and soft cream.
* Compare our fragrance to Sweet Strawberries and Cream® by Bath and Bodyworks.
Flashpoint: >200° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
IFRA Maximum Skin Exposure Levels:
Soap: 6.25% | Body Wash: 6.25% | Bath Bombs: 6.25% | |||
Body Lotion: 6.25% | Body Scrub: 6.25% | Candles: 100% | |||
Perfume: 6.25% | Deodorant: 1.25% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Yankee Candle.
Description from BBW: Fresh Cranberry, Spiced Pumpkin, Crisp Apple, Rich Clove with Essential Oils
Probably not the best fragrance for soaps due to the low IFRA %.
* Compare our fragrance to The Perfect Autumn® by Bath & Body Works.
Flashpoint: >200° F
Vanilla Content: 0.01 %
Country of Origin: USA
Phthalate Content: Phthalate Free
IFRA Maximum Skin Exposure Levels:
Soap: 0.56% | Body Wash: 0.56% | Bath Bombs: 0.56% | |||
Body Lotion: 31.11% | Body Scrub: 0.56% | Candles: 100% | |||
Perfume: 0.56% | Deodorant: 0.22% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
FRESH CITRUS COMBINES WITH WILD ORCHIDS ON A BACKGROUND OF VANILLA MUSK AND SWEET SANDALWOOD.
This is an untested fragrance.
* Compare our fragrance to Tiki Beach® dupe by Bath & Body Works.
Flashpoint: 178° F
Vanilla Content: 1.96 %
Country of Origin: USA
Phthalate Content: Phthalate Free
IFRA Maximum Skin Exposure Levels:
Soap: 18.18 % | Body Wash: 18.18 % | Bath Bombs: 18.18 % | |||
Body Lotion: 18.18% | Body Scrub: 18.18 % | Candles: 100% | |||
Perfume: 15.31% | Deodorant: 3.64% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
Description from BBW: A sweet, warm aroma that combines sweet smelling pear, nutty pralines, and warm tonka bean with a hint of graham cracker for a delicious smelling fragrance.
* Compare our fragrance to Toasted Praline Pear® by Bath & Body Works.
Flashpoint: 181° F
Vanilla Content: 7.30%
Country of Origin: USA
Phthalate Content: Phthalate Free
IFRA Maximum Skin Exposure Levels:
Soap: 21.70% | Body Wash: 21.70% | Bath Bombs: 21.70% | |||
Body Lotion: 32.47% | Body Scrub: 21.70% | Candles: 100% | |||
Perfume: 61.69% | Deodorant: 6.49% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
Description: A sweet and green fragrance that captures the enchanting tobacco flower.
* Compare our fragrance to Tobacco Flower® by Bath & Body Works.
Flashpoint: >200° F
Vanilla Content: 0.40%
Country of Origin: USA
Phthalate Content: Phthalate Free
IFRA Maximum Skin Exposure Levels:
Soap: 10.87% | Body Wash: 10.87% | Bath Bombs: 10.87% | |||
Body Lotion: 10.87% | Body Scrub: 10.87% | Candles: 100% | |||
Perfume: 10.87% | Deodorant: 4.35% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
Description: LAVENDER FLOWERS SURROUNDED WITH JASMINE, CYCLAMEN, LILY AND VIOLET ON A BASE OF TONKA BEANS, MUSK AND SANDALWOOD.
* Compare our fragrance to Tranquil Sleep® by Bath and Bodyworks.
Flashpoint: >200° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
IFRA Maximum Skin Exposure Levels:
Soap: 8.58% | Body Wash: 8.58% | Bath Bombs: 8.58% | |||
Body Lotion: 8.58% | Body Scrub: 8.58% | Candles: 100% | |||
Perfume: 8.58% | Deodorant: 0.86% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Yankee Candle.
A vibrant fragrance that illustrates invigorating notes of tropical fruits, crisp lemon, lime and exotic greens.
* Compare our fragrance to Volcano® by Capri Blue.
Flashpoint: >200° F
Vanilla Content: 15.00%
Country of Origin: USA
Phthalates: Phthalate Free
IFRA Maximum Skin Exposure Levels:
Soap: 10.00% | Body Wash: 10.00% | Bath Bombs: 10.00% | |||
Body Lotion: 10.00% | Body Scrub: 10.00% | Candles: 100% | |||
Perfume: 10.00% | Deodorant: 2.00% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Capri Blue.
Description: WATERMELON ICE, SPRING WATER AND ZESTY LEMONS.
* Compare our fragrance to Watermelon Lemonade® by Bath & Body Works.
Flashpoint: >200° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
IFRA Maximum Skin Exposure Levels:
Soap: 16.81% | Body Wash: 16.81% | Bath Bombs: 16.81% | |||
Body Lotion: 41.67% | Body Scrub: 16.81% | Candles: 100% | |||
Perfume: 27.78% | Deodorant: 6.94% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
Description: Blend of wood chips, pine needles & vanilla beans enhanced by cinnamon bark, green apple & mint leaves on a dry down of powdery musk.
* Compare our fragrance to Welcome Home® by Bath & Body Works.
Flashpoint: 168° F
Vanilla Content: 9.50%
Country of Origin: USA
Phthalate Content: NOT Phthalate Free
IFRA Maximum Skin Exposure Levels:
Soap: 2.50% | Body Wash: 2.50% | Bath Bombs: 2.50% | |||
Body Lotion:2.50% | Body Scrub: 2.50% | Candles: 100% | |||
Perfume:2.50% | Deodorant:2.50% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
Description: An enchanting blend of blooming white jasmine and apple blossoms is brought together with a dash of cedarwood to create a subtly beautiful aroma.
* Compare our fragrance to White Jasmine® by Bath and Bodyworks.
Flashpoint: 181° F
Vanilla Content: 0.30%
Country of Origin: USA
Phthalate Content: Phthalate Free
IFRA Maximum Skin Exposure Levels:23.81
Soaps: 23.81% | Body Wash: 23.81% | Bath Bombs: 23.81% | |||
Body Lotion: 53.33% | Body Scrub: 23.81% | Candles: 100% | |||
Perfume: 33.81% | Deodorant: 8.24% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Bodyworks.
A charming blend of juicy hucklberry, black currant, fresh green leaves, and musky vanilla notes.
This is an untested fragrance.
* Compare our fragrance to Wild Huckleberry® by Bath & Body Works.
Flashpoint: 181° F
Vanilla Content: 0.38 %
Country of Origin: USA
Phthalate Content: Phthalate Free
IFRA Maximum Skin Exposure Levels:
Soap: 6.67% | Body Wash: 6.67% | Bath Bombs: 6.67% | |||
Body Lotion: 6.67% | Body Scrub: 6.67% | Candles: 100% | |||
Perfume: 6.67% | Deodorant: 1.33% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.