Limited Editions

Did you miss out on one of our Facebook Group buys?

You're in luck!! All of these fragrances were brought in by our SSS - ISO Facebook group and are Limited Editions. Once they're gone we won't bring them in again until another group buy opens up.
Sort By:  
Into the Blue Escada Type

Fresh cut grass, green leaves, tropical, fruity carambola and resinous marigold intermesh with succulent watermelon, sweet watery blue lotus and brightly vivid carnation. Warm musk, the incense-like nuances of cedar, woody notes and golden amber intermingle to unite and enhance this green, ozonic, floral accord.


* Compare our fragrance to Into the Blue® by Escada.


Flashpoint: >200° F
Vanilla Content:  0.10%
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 75.76%Body Wash: 75.76%Bath Bombs: 75.76%
Body Lotion: 0.14%Body Scrub: 75.76%Candles: 100%
Perfume: 0.14%Deodorant: 0.14%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Escada.

$23.69
Kitchen Lemon BBW Type

Description:  Fresh, zesty lemon with sparks of bergamot perfect for an everyday bright, clean fragrance.

* Compare our fragrance to Kitchen Lemon® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  0.38%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 77.64%Body Wash: 77.64%Bath Bombs: 77.64%
Body Lotion: 0.21%Body Scrub: 77.64%Candles: 100%
Perfume: 0.21%Deodorant: 0.21%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$18.69
Lavender Marshmallow BBW Type

A scrumptious blend of lavender, vanilla marshmallow and amber.

* Compare our fragrance to Lavender Marshmallow® dupe by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  0.64 %
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 9.16 %Body Wash: 9.16 %Bath Bombs: 9.16 %
Body Lotion: 25.64%Body Scrub: 9.16 %Candles: 100%
Perfume: 16.30%Deodorant: 4.03%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$18.69
Lemon Curd Rustic Escentuals Type

Description from Rustic Escentuals: A traditional Lemon Curd is a staple in afternoon English tea and is used as a delicate spread on finger cakes, sugar dusted scones, and tarts. Our rendition of this classic combines fresh, zesty lemons, warm vanilla extract and a hint of sugar blended with fresh cream. It's a refreshing and mouthwatering blend of tart and creaminess.

* Compare our fragrance to Lemon Curd® by Rustic Escentuals.

Flashpoint:   F
Vanilla Content: %
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soaps: 10.34%Body Wash: 10.34%Bath Bombs: 10.34%
Body Lotion: 1.29%Body Scrub: 10.34%Candles: 100%
Perfume: 5.17%Deodorant: 0.28%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Rustic Escentuals.

$18.69
Let Them Eat Cake by Tokyo Milk Type

Description: A touch of decadence: Sugar Cane, Coconut Milk, Vanilla Orchid & White Musk

* Compare our fragrance to Let Them Eat Cake® by Tokyo Milk.



Flashpoint:  >200° F
Vanilla Content:  9.30%
Country of Origin: USA
Phthalate Content: CONTAINS PHTHALATES



IFRA Maximum Skin Exposure Levels:

Soap: 2.15%Body Wash: 2.15%Bath Bombs: 2.15%
Body Lotion: 0.37%Body Scrub: 2.15%Candles: 100%
Perfume: 0.37%Deodorant: 0.22%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Tokyo Milk.

$23.69
Lost Cherry Tom Ford Type

Description: An exciting blend of tart cherries, sensual rose, and mysterious woody notes yield an indulgently invigorating aroma.

* Compare our fragrance to Lost Cherry® by Tom Ford.



Flashpoint:  181° F
Vanilla Content:  7.00%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 20.83%Body Wash: 20.83%Bath Bombs: 20.83%
Body Lotion: 11.67%Body Scrub: 20.83%Candles: 100%
Perfume: 7.50%Deodorant: 1.67%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Tom Ford.

Out of Stock
$26.69
Mahogany Apple BBW Type

Description from BBW: A friendly, warm blend of rich red mahogany woods, delicious apple, pink peppercorn and fresh lavender sprigs.

* Compare our fragrance to Mahogany Apple® by Bath & Body Works.



Flashpoint:  >200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 5.26%Body Wash: 5.26%Bath Bombs: 5.26%
Body Lotion: 5.26%Body Scrub: 5.26%Candles: 100%
Perfume: 5.26%Deodorant: 1.05%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$24.69
Mango Mai Tai BBW Type

Description from BBW: Succulent mango nectar and the fragrant nuances of jasmine lei flower intermingle with sun-kissed grapefruit and the Oahu island scents of sugarcane. The base has the sweet aroma of the state tree of Hawaii - The woody tonalities of the kukui tree which blends harmoniously to enhance this special, exotic fragrance.


* Compare our fragrance to Mango Mai Tai® by Bath & Body Works.



Flashpoint:  176° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 25.46%Body Wash: 25.46%Bath Bombs: 25.46%
Body Lotion: 0.06%Body Scrub: 25.46%Candles: 100%
Perfume: 0.06%Deodorant: 0.06%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$18.69
Marshmallow Pumpkin Latte BBW type

Description:  A delightfully sweet aroma that combines pumpkin spiced latte and toasty marshmallows with creamy sandalwood and sweet musk to produce a decadent, warm aroma..

* Compare our fragrance to Marshmallow Pumpkin Latte® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  12.50%
Country of Origin: USA
Phthalate Content: Phthalate Free

IFRA Maximum Skin Exposure Levels:

Soap: 18.90%Body Wash: 18.90%Bath Bombs: 18.90%
Body Lotion: 52.91%Body Scrub: 18.90%Candles: 100%
Perfume: 33.64%Deodorant: 8.31%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$20.69
Midnight Blue Citrus BBW Type

Description:  Fresh tropical citrus tonalities intertwine with the refreshing aqueous notes of a tropical midnight sea scape. Warm, soft musk blends together to unite, enhance and complete this fragrant accord.

* Compare our fragrance to Midnight Blue Citrus® by Bath & Body Works.



Flashpoint:  189° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 53.76%Body Wash: 53.76%Bath Bombs: 53.76%
Body Lotion: 68.18%Body Scrub: 53.76%Candles: 100%
Perfume: 45.45%Deodorant: 11.36%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$20.69
My Burberry Black by Burberry Type

Description:  Sweet jasmine blooms intertwine with fragrant rose scents and the succulent tonalities of peach nectar. Golden amber and minty patchouli blend together to unite, enhance and complete this fragrant accord.

* Compare our fragrance to My Burberry Black® by Burberry.



Flashpoint:  >200° F
Vanilla Content:  1.00%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 49.18%Body Wash: 49.18%Bath Bombs: 49.18%
Body Lotion: 24.59%Body Scrub: 49.18%Candles: 100%
Perfume: 16.39%Deodorant: 3.28%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Burberry.

$24.69
New York Night by Bond #9 Type

A unisex Oriental vanilla fragrance that exudes the deep richness of coffee and sweet caramel. Creamy and seductive.

* Compare our fragrance to New York Night® by Bond #9.


Flashpoint: 181° F
Vanilla Content:  2.50%
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 16.67%Body Wash: 16.67%Bath Bombs: 16.67%
Body Lotion: 37.33%Body Scrub: 16.67%Candles: 100%
Perfume: 23.67%Deodorant: 5.77%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bond #9.

$24.69
Peony and Blush Suede Jo Malone Type

Description: A JUICY BITE OF RED APPLES FOLLOWED WITH WHISPERS OF RED ROSES, CARNATION AND WILD JASMINES. A SEDUCTIVE BLEND OF SUEDE, SHEER MUSK AND WOODS FINISH THIS DELIGHTFUL SCENT.

* Compare our fragrance to Peony and Blush Suede® by Jo Malone.



Flashpoint:  >200° F
Vanilla Content:  0.40%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 25.00%Body Wash: 25.00%Bath Bombs: 25.00%
Body Lotion: 25.00%Body Scrub: 25.00%Candles: 100%
Perfume: 25.00%Deodorant: 5.00%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Jo Malone.

$30.69
Peppermint Marshmallow BBW Type

Description from BBW: A sweet blend of marshmallow and sugar combined with a refreshing minty punch.

* Compare our fragrance to Peppermint Marshmallow® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  0.34%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 100%Body Wash: 100%Bath Bombs: 100%
Body Lotion: 100%Body Scrub: 100%Candles: 100%
Perfume: 100%Deodorant: 40.63%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$18.69
Pine Cones Candle Science Type

Amazing balsam and spruce notes intertwined with minty patchouli and cedar oils.  Formulated for candles but soap safe up to 7.96%. Contains phthalates.

* Compare our fragrance to Pine Cones® dupe by Candle Science.



Flashpoint:  > 180° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: NOT Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 7.96 %Body Wash: 7.96 %Bath Bombs: 7.96 %
Body Lotion: 0.14%Body Scrub: 7.96 %Candles: 100%
Perfume: 0.14 %Deodorant: 0.14 %Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Candle Science.

$18.69
Pineapple Slices

This fruity sensation is a blend of fragrant pineapple, ripe strawberry, citrus, and kissed with peach in a sweet sugary base.

* Compare our fragrance to Pineapple Slices® by Lebermuth.



Flashpoint:  155° F
Vanilla Content:  0 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 5.00%Body Wash: 5.00%Bath Bombs: 5.00%
Body Lotion: 100%Body Scrub: 5.00%Candles: 100%
Perfume: 100%Deodorant: 29.73%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Lebermuth.

$18.69
Pink Apple Punch BBW Type

Description:  Sweet and juicy pink lady apples, spicy cinnamon and honey intermingle with fruit punch having hints of succulent peach. Subtly sweet nutmeg and watery melon harmoniously blend with warm musk, creamy vanilla, the tropical scent of coconut and sweet caramel to unite and enhance this fresh,gourmand fragrance.

* Compare our fragrance to Pink Apple Punch® by Bath & Body Works.



Flashpoint:  180° F
Vanilla Content:  0.38%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 2.44%Body Wash: 2.44%Bath Bombs: 2.44%
Body Lotion: 2.44%Body Scrub: 2.44%Candles: 100%
Perfume: 2.44%Deodorant: 0.49%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$20.69
Pink Fresh and Clean VS Type

Description: The delicious, crispy freshness of red apple coupled with the delicate, sweet, powdery nuances of lilies in full bloom blend together; with the clear clean fresh air nuances after a gentle soaking rain; blend harmoniously together to unite and enhance this refreshingly fragrant accord.

* Compare our fragrance to Pink Fresh and Clean® by Victoria's Secret

Flashpoint:  >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 22.08%Body Wash: 22.08%Bath Bombs: 22.08%
Body Lotion: 0.11%Body Scrub: 22.08%Candles: 100%
Perfume: 0.11%Deodorant: 0.11%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Victoria's Secret.

$20.69
Ponche LUSH Type

Sweet fruit medley nuances, tangy red berries and succulent plum notes intertwine with the rosy-woody notes of petitgrain and bracing artemisia. Fresh-cut green herbal notes blend together to enhance and complete this fragrant accord.

 

* Compare our fragrance to Ponche® by LUSH.


Flashpoint: 180° F
Vanilla Content:  0.70%
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 1.54%Body Wash: 1.54%Bath Bombs: 1.54%
Body Lotion: 1.54%Body Scrub: 1.54%Candles: 100%
Perfume: 1.54%Deodorant: 0.31%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with LUSH.

$34.69
PRESALE Holiday BBW

Description:  A delightful mixture of nutmeg, clove, and cinnamon makes a warming blend of holiday spices.

* Compare our fragrance to Holiday® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  0.18%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 6.51%Body Wash: 6.51%Bath Bombs: 6.51%
Body Lotion: 0.23%Body Scrub: 6.51%Candles: 100%
Perfume: 0.23%Deodorant: 0.23%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$22.69
Pumpkin Donut Shop BBW Type

Description:  A delicious smelling aroma that combines the smell of fresh, hot donuts with vanilla and pumpkin spice to produce a tantalizing fragrance.

* Compare our fragrance to Pumpkin Donut Shop® by Bath & Body Works.



Flashpoint:  > 200° F
Vanilla Content:  2.46%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 11.24%Body Wash: 11.24%Bath Bombs: 11.24%
Body Lotion: 60.00%Body Scrub: 11.24%Candles: 100%
Perfume: 20.00%Deodorant: 4.94%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$18.69
Pumpkin Vanilla Cream BBW Type

Description:  A delicious fragrance that captures the seasonal aroma of a fresh baked pumpkin vanilla cream pie.

* Compare our fragrance to Pumpkin Vanilla Cream® by Bath & Body Works.



Flashpoint:  > 200° F
Vanilla Content:  2.85%
Country of Origin: USA
Phthalate Content: NOT Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 0.31%Body Wash: 0.31%Bath Bombs: 0.31%
Body Lotion:0.31%Body Scrub: 0.31%Candles: 100%
Perfume:0.31%Deodorant:0.31%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$18.69
Radiant Red Maple BBW Type

Description:  Crisp, red Macintosh apple intertwines with hearth side smoky notes and sweet maple scents. Warm caramel and aromatic woody notes blend together to unite, enhance and complete this fragrant accord.

* Compare our fragrance to ® by Radiant Red Maple Bath & Body Works.



Flashpoint:  >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 2.23%Body Wash: 2.23%Bath Bombs: 2.23%
Body Lotion: 2.23%Body Scrub: 2.23%Candles: 100%
Perfume: 2.23%Deodorant: 0.89%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$19.69
Rose Water & Ivy BBW Type

A fresh-cut bouquet of soft rose petals, rain-kissed ivy & soft musk.

This is an untested fragrance.

* Compare our fragrance to Rose Water & Ivy® by Bath & Body Works.



Flashpoint:  >200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 50.00%Body Wash: 50.00%Bath Bombs: 50.00%
Body Lotion: 50.00%Body Scrub: %Candles: 100%
Perfume: 50.00%Deodorant: 10.00%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

Out of Stock
$22.69
Saijo Persimmon by Voluspa Type

SWEET ORANGE NOTES LAYERED WITH RED CURRANTS, PEACH AND LIGHT FLORALS.


* Compare our fragrance to Saijo Persimmon® by Voluspa


Flashpoint: 158° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 12.50%Body Wash: 12.50%Bath Bombs: 12.50%
Body Lotion: 0.05%Body Scrub: 12.50%Candles: 100%
Perfume: 0.05%Deodorant: 0.05%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Voluspa.

$21.69
Sandalwood & Amber Lebermuth Type

A blend of amber and sandalwood with top notes of orange and bergamot, middle notes of violet and rose with a base of vanilla, cedarwood and sandalwood.

* Compare our fragrance to Sandalwood & Amber® by Lebermuth.



Flashpoint:  > 200° F
Vanilla Content:  1-5 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 5.00%Body Wash: 5.00%Bath Bombs: 5.00%
Body Lotion: 100%Body Scrub: 5.00%Candles: 100%
Perfume: 100%Deodorant: 29.73%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Lebermuth.

$20.69
Santiago Huckleberry by Voluspa Type

WILD HUCKLEBERRIES ARE MIXED WITH HINTS OF LEMON PEEL, VANILLA EXTRACT AND SUGAR CANE FOR A DELIGHTFUL FRUITY AROMA.

* Compare our fragrance to Santiago Huckleberry® by Voluspa


Flashpoint: 175° F
Vanilla Content:  0.30%
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 50.71%Body Wash: 50.71%Bath Bombs: 50.71%
Body Lotion: 0.02%Body Scrub: 50.71%Candles: 100%
Perfume: 0.02%Deodorant: 0.02%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Voluspa.

$21.69
Sparkling Icicles BBW Type

Description from BBW: A bright refreshing blend of oakmoss and bergamot rounded out with a hint of fresh citrus.

* Compare our fragrance to Sparkling Icicles® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 100%Body Wash: 100%Bath Bombs: 100%
Body Lotion: 66.67%Body Scrub: 100%Candles: 100%
Perfume: 40.00%Deodorant: 13.33%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$20.69
Spicebomb for Men Viktor & Rolf Type

Description: The rosy nuances of pink pepper, the resinous facets of elemi, crisp bergamot and refreshing grapefruit notes intertwine with warm cinnamon, bitter-sweet saffron and spicy paprika. The deep tonalities of tobacco, soft, supple suede and grassy vetiver blend harmoniously to unite and enhance this fragrant accord.

 

* Compare our fragrance to Spicebomb® by Viktor & Rolf.

Flashpoint:   194 F
Vanilla Content:  1.20%
Country of Origin: USA
Phthalate Content: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soaps: 14.97%Body Wash: 14.97%Bath Bombs: 14.97%
Body Lotion: 27.12%Body Scrub: 14.97%Candles: 100%
Perfume: 16.95%Deodorant: 4.14%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Viktor & Rolf.

$29.69
Spiritueuse Double Vanille by Guerlain Type

Description:  This balsamic vanilla fragrance opens with the rosy scents of pink pepper berries. Clean bergamot, provocative incense, ylang ylang, Bulgarian rose and sweet jasmine intertwine with spicy, woody cedarwood, the camphor-like scent of benzoin and warm, sweet vanilla to unite and enhance this fragrant accord.

* Compare our fragrance to Spiritueuse Double Vanille® by Guerlain.



Flashpoint:  180° F
Vanilla Content:  0.47%
Country of Origin: USA
Phthalate Content: Phthalate Free

IFRA Maximum Skin Exposure Levels:

Soap: 21.11%Body Wash: 21.11%Bath Bombs: 21.11%
Body Lotion: 47.30%Body Scrub: 21.11%Candles: 100%
Perfume: 29.98%Deodorant: 7.31%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Guerlain.

$26.69
Per Page      31 - 60 of 74