Fragrance Oils

Sort By:  
$30.20
$27.20
$25.20
$26.20
$26.20
$22.20
$28.20
$33.20
$23.20
$23.20
$27.20
$12.60
Caribbean Teakwood

A UNIQUE COMBINATION OF FRESH CITRUS FOLLOWED BY LIGHT SPICE NOTES OF CINNAMON AND CLOVE ON A WARM BASE OF AMBER, VANILLA AND SWEET WOODY NOTES.

Flashpoint:  >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap and Candle



IFRA Maximum Skin Exposure Levels:

Soap: 12.00%Body Wash: 12.00%Bath Bombs: 12.00%
Body Lotion: 16.28%Body Scrub: 12.00%Candles: 100%
Perfume: 64.49%Deodorant: 3.45%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

$22.20
Casa Pacifica by Voluspa Type

NOTES OF PACIFIC COAST DRIFTWOOD, THE SPRAY OF OCEAN WAVES CRASHING THE THE ROCKS AND WILD BRUSH OF THE SEASHORE REMIND SOMEONE OF A BEACH HOUSE ON THE WEST COAST.

* Compare our fragrance to Casa Pacifica® by Voluspa


Flashpoint: >200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 31.65%Body Wash: 31.65%Bath Bombs: 31.65%
Body Lotion: 0.07%Body Scrub: 31.65%Candles: 100%
Perfume: 0.07%Deodorant: 0.07%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Voluspa.

$30.20
Cloudberry and Balsam Wooden Wick Type
Plump pink cloudberries and fresh balsam intertwine in this Wooden Wick Dupe.

* Compare our fragrance to Cloudberry + Balsam® by Wooden Wick.


Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 95.50%Body Wash: 95.50%Bath Bombs: 95.50%
Body Lotion: 76.25%Body Scrub: 95.50%Candles: 100%
Perfume: 100%Deodorant: 16.05%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Wooden Wick.

$22.20
Coco Cabana Cream by Sol De Janeiro® Type

This highly-addictive scent is a dupe of the super-popular Coco Cabana cream scent!!  Indulge in the captivating allure of coconut, expertly infused with a fusion of Brazilian-inspired ingredients. Experience the mesmerizing fragrance that intertwines the velvety charm of fresh green coconuts, the exotic fascination of tropical orchids, and the irresistible decadence of toasted praline. Dupe of SOL de Janerio's Cheirosa 39 fragrance.

* Compare our fragrance to Coco Cabana Cream® SOL Janeiro.


Flashpoint: > 199° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candles


IFRA Maximum Skin Exposure Levels:

Soap: 13.33%Body Wash: 13.33%Bath Bombs: 13.33%
Body Lotion: 28.33%Body Scrub: 13.33%Candles: 100%
Perfume: 2.27%Deodorant: 6.11%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 

Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with SOL Janeiro.

$27.20
Cocoa Butter Cashmere® Brambleberry Type

Description: This scent has essences of light spices, cedarwood, vanilla tonka, coconut, jasmine, olive wood, sandalwood, amber, musk, and cocoa butter. 

* Compare our fragrance to Cocoa Butter Cashmere® by Brambleberry.


Flashpoint:  181 F
Vanilla Content:  10.80%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

Soap: 12.90%Body Wash: 12.90%Bath Bombs: 12.90%
Body Lotion: 43.65%Body Scrub: 12.90%Candles: 100%
Perfume: 27.78%Deodorant: 6.35%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Brambleberry.

$25.20
Cocoa Ganache and Vanilla Truffle® Wooden Wick Type
A delicious and sophisticated blend of warm vanilla truffle and lucious cocoa ganache.

* Compare our fragrance to Cocoa Ganache and Vanilla Truffle® by Wooden Wick.


Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 2.32%Body Wash: 2.32%Bath Bombs: 2.32%
Body Lotion: 5.25%Body Scrub: 2.32%Candles: 100%
Perfume: 0.50%Deodorant: 1.71%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

$26.69
Coconut Milk Crafter's Choice Type

Creamy coconut milk blended with flakes of shaved coconut, warm vanilla and white musk.

* Compare our fragrance to Coconut Milk® dupe of Crafters Choice.



Flashpoint:  > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 19.75%Body Wash: 19.75%Bath Bombs: 19.75%
Body Lotion: 28.00%Body Scrub: 19.75%Candles: 100%
Perfume: 18.00%Deodorant: 4.33%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Crafters Choice.

$23.20
Dark Rose and Labdanum Wooden Wick Type
Deep sweet plum and dark rose blend together to make this seductively delicious floral scent.

* Compare our fragrance to Dark Rose and Labdanum® by Wooden Wick.


Flashpoint: >200° F
Vanilla Content:  >1%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 12.26%Body Wash: 12.26%Bath Bombs: 12.26%
Body Lotion: 3.58%Body Scrub: 12.26%Candles: 100%
Perfume: 43.0%Deodorant: 2.30%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Wooden Wick.

$30.20
Dried Florals and Incense Wooden Wick Type

Description:  Spicy notes mix with smoky and floral notes in this fragrance accord.

* Compare our fragrance to Dried Florals and Incense® by Wooden Wick.


Flashpoint: >200 F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

Soap: 12.06%Body Wash: 12.06%Bath Bombs: 12.06%
Body Lotion: TBD%Body Scrub: 12.06%Candles: 100%
Perfume: TBD%Deodorant: TBD%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

$26.20
Dried Lavender and Oak Yankee Type
The intoxicating scent of hand tied bunches of lavender intertwined with the woodsy scents and spices of a Summer outdoor farmers market.

* Compare our fragrance to Dried Lavender and Oak® by Yankee Candle.


Flashpoint: >200° F
Vanilla Content:  < 5%
Country of Origin: USA
Phthalates: Phthalate Free
Skin Safe:  Yes
Oil Color:  Pale Yellow
Formulated For:  Soap / Candle
Essential Oils In Fragrance:  Orange, Patchouli, Ginger, Lemon, Amyris

Top Notes:  Citrus
Middle Notes:  Lavender, Ginger
Bottom Notes:  Wood, Patchouli

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

Soap: 8.84%Body Wash: 8.84%Bath Bombs: 8.84%
Body Lotion: 2.75%Body Scrub: 8.84%Candles: 100%
Perfume: 10.75%Deodorant: 0.57%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.


It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Yankee Candle.

$24.20
Driftwood and Juniper by Wooden Wick Type

Description:  This unique combination of tobacco and incense is intertwined with the scent of the ocean and the floral and fern notes from the Mediterranean region.

* Compare our fragrance to Driftwood and Juniper® by Wooden Wick.


Flashpoint: TBDF
Vanilla Content:  TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

Soap: 8.33%Body Wash: 8.33%Bath Bombs: 8.33%
Body Lotion: TBD%Body Scrub: 8.33%Candles: 100%
Perfume: TBD%Deodorant: TBD%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

$25.20
Energy BBW Type - Orange/Ginger

A true aromatherapy experience! This is one of my favorite scents from Bath & Body Works. It is a perfect combination of a slightly sweet, citrus-y fragrance plus the rich, spicier note of the ginger. The scent is pleasantly lingering and really does provide a bit of a lift throughout the day. No discoloration or ricing but moderate acceleration in CP soaps.

* Compare our fragrance to Energy® by Bath and Body Works.


Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 21.82%Body Wash: 21.82%Bath Bombs: 21.82%
Body Lotion: 0.06%Body Scrub: 21.82%Candles: 100%
Perfume: 0.06%Deodorant: 0.13%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$26.20
Eucalyptus Spearmint Peak Candle Type

What a fresh, clean scent! This is a spot-on dupe of the Bath & Bodyworks fragrance. It's a wonderful blend of eucalyptus and minty spearmint. Relaxing and soothing!

 

* Compare our fragrance to Eucalyptus Spearmint® dupe by Peak Candle of Bath & Bodyworks scent.



Flashpoint:  196° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 8.03%Body Wash:8.03%Bath Bombs: 8.03%
Body Lotion: 0.06%Body Scrub: 8.03%Candles: 100%
Perfume: 0.06%Deodorant: 0.06%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$22.20
Evening Air Yankee Candle Type

AN AUTUMN NIGHT WITH THE AROMA OF JASMINE, LILAC, SANDALWOOD AND MUSK.


* Compare our fragrance to Evening Air by Yankee Candle.

Flashpoint: > 200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 17.24%Body Wash: 17.24%Bath Bombs: 17.24%
Body Lotion: 22.00%Body Scrub: 17.24%Candles: 100%
Perfume: 86.00%Deodorant: 4.60%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Yankee Candle.

$23.20
F**cking Fabulous Tom Ford Type

F**cking Fabulous is just that...it's probably the most perfect description of a fragrance I've ever heard! It made it's debut during New York Fashion Week in 2017 and it's been popular ever since. Retailing for $335 for 1.7 fl oz of perfume - it's definitely one you'll want in your arsenal!

Description: Sephora says this fragrance is "explicit, exclusive, and fabulous, this oriental artisanal scent features spices and warm and sweet gourmands."

* Compare our fragrance to Fucking Fabulous by Tom Ford.

Notes: 
Lavender, Sage, Bitter Almond, Tonka Beans, Leather, Cashmere and Amber. The essential oils used to make this dupe include Amyris, Chamomile and Patchouli.


Flashpoint:  >200° F
Vanilla Content:  0.12%
Country of Origin: USA
Phthalates: Phthalate Free
Formulate For:  Fine Fragrance / Body Oil



IFRA Maximum Skin Exposure Levels:

Soap: 12.50%Body Wash: 12.50%Bath Bombs: 12.50%
Body Lotion: 12.50%Body Scrub: 12.50%Candles: 100%
Perfume: 12.50%Deodorant: 3.75%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Tom Ford.

$28.20
Febreze Air Wood by Febreze Type

Description from Febreze: Notes of oud, amber, and cedar create an ambience of craftsmanship and nature.

* Compare our fragrance to Febreze Air Wood® by Febreze.


Flashpoint: TBD° F
Vanilla Content:  TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

Soap: TBD%Body Wash: TBD%Bath Bombs: TBD%
Body Lotion: TBD%Body Scrub: TBD%Candles: 100%
Perfume: TBD%Deodorant: TBD%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Febreze.

$33.20
French Lavender & Honey BBW Type

Intoxicating French Lavender flowers which have been sprinkled with a bit of sweet honey and anchored with a musk base. It held it's scent through CP gel. Great for Valentine's Day or Mother's Day!  Bath bombs with this scent were AMAZING! There was no ricing or discoloration.

* Compare our fragrance to French Lavender & Honey® by Bath and Body Works.


Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 66.67%Body Wash: 66.67%Bath Bombs: 66.67%
Body Lotion: 0.06%Body Scrub: 66.67%Candles: 100%
Perfume: 0.06%Deodorant: 0.13%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$23.20
French Vanilla & Amber Peak Type

Such a warm and inviting scent! Delicious vanilla combined with warm amber and soft wood notes. Formulated for candles but skin safe up to 1.88%.

* Compare our fragrance to French Vanilla and Amber® dupe by Peak Candle.



Flashpoint:  > 200° F
Vanilla Content:  6.72 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 67.20 %Body Wash: 67.20 %Bath Bombs: 67.20 %
Body Lotion: 1.88%Body Scrub: 67.20 %Candles: 100%
Perfume: 1.88 %Deodorant: 1.88 %Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$23.20
Fresh Baked Bread

Smells just like fresh baked bread straight out of the oven! 


Flashpoint:  199° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candles


IFRA Maximum Skin Exposure Levels:

Soap: 1.00%Body Wash: 1.00%Bath Bombs: 1.00%
Body Lotion: 1.00%Body Scrub: 1.00%Candles: 100%
Perfume: 1.00%Deodorant: 1.00%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 

Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

$27.20
Fresh Snow by Diamond Candle Type

Description:  This fragrance is an intoxicating blend of eucalyptus and peppermint and reminds one of being outside after a fresh snow on a crisp morning. This will definitely be a new holiday favorite!

* Compare our fragrance to Fresh Snow® by Diamond Candles.



Flashpoint:  ° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

Soap: %Body Wash: %Bath Bombs: %
Body Lotion: %Body Scrub: %Candles: 100%
Perfume: %Deodorant: %Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Diamond Candle.

$12.60
Per Page      21 - 40 of 119