Peak Candle Clones

Sort By:  
Autumn Walk Peak Candle Type

This scent is exactly what autumn smells like! Crisp, rustling leaves are coupled with the scent of cool, brisk air. These are anchored with woodsy mountain pine, cedar and golden aspen while hints of sage, forest berries and clove dance in. Please consult the IFRA information below.

 

* Compare our fragrance to Autumn Walk® dupe by Peak Candle.



Flashpoint:  >200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 8.03%Body Wash:8.03%Bath Bombs: 8.03%
Body Lotion: 0.06%Body Scrub: 8.03%Candles: 100%
Perfume: 0.06%Deodorant: 0.06%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$18.00
Balsam & Cinnamon Peak Type

Warm cinnamon with hints of balsam fir. A super winter blend. Awesome holiday fragrance!

* Compare our fragrance to Cinnamon & Balsam® by Peak Candle.



Flashpoint: 173° F
Vanilla Content:   0.12%
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 0. %Body Wash: 0. %Bath Bombs: 0. %
Body Lotion: 0. %Body Scrub: 0. %Candles: 100 %
Perfume: 0.00 %Deodorant: 0. %Lip: 0.00 %


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$19.00
Birthday Cake Peak Candle Type

No need to make a wish - it's already granted! This amazing birthday cake scent features scrumptious white cake frosted with a vanilla butter cream. Truly - it's the scent of bakery fresh cakes! 

* Compare our fragrance to Birthday Cake® dupe by Peak Candle.



Flashpoint:  > 200° F
Vanilla Content:  16.15 %
Country of Origin: USA
Phthalates: Not Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 83.33 %Body Wash: 83.33 %Bath Bombs: 83.33 %
Body Lotion: 14.00%Body Scrub: 83.33 %Candles: 100%
Perfume: 9.00 %Deodorant: 2.17 %Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$18.00
Cinnaberry Peak Candle Type

Smells like the holiday season! Raspberry and plum sweetens up the cranberry base and is highlighted with warm cinnamon with a splash of orange. It's perfect for those chilly winter days! Formulated for candles but skin safe up to 0.08%.

* Compare our fragrance to Cinnaberries® dupe by Peak Candle.



Flashpoint:  > 200° F
Vanilla Content:  0.96 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 0.49 %Body Wash: 0.49 %Bath Bombs: 0.49 %
Body Lotion: 0.08%Body Scrub: 0.49 %Candles: 100%
Perfume: 0.08 %Deodorant: 0.08 %Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$18.00
Coconut Milk
Coconut Milk Peak Type

A super molecular clone of the Peak Candle fragrance. Enjoy the sweet smell of the milk of a freshly cracked open coconut. Coconut water at it's finest!

* Compare our fragrance to Coconut Milk by Peak Candle.

Flashpoint: 180° F
Vanilla Content:  0.90 %
Country of Origin: USA
Phthalates: Not Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 10.10%Body Wash: 10.10%Bath Bombs: 10.10%
Body Lotion: 6.72%Body Scrub: 10.10%Candles: 100%
Perfume: 1.09%Deodorant: 1.09%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candle.

$18.00
Cranberry Apple Marmalade
Cranberry Apple Marmalade Peak Type

A super molecular clone of the Peak Candle fragrance. Fresh, sweet apples are combined with tart cranberries and warm winter spices. Combined they make truly a great combination. Formulated for candles but skin safe up to 0.32%

* Compare our fragrance to Cranberry Apple Marmalade by Peak Candle.

Flashpoint: 165° F
Vanilla Content:  3.22 %
Country of Origin: USA
Phthalates: Not Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 0.32%Body Wash: 0.32%Bath Bombs: 0.32%
Body Lotion: 0.01%Body Scrub: 0.32%Candles: 100%
Perfume: 0.01%Deodorant: 0.01%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candle.

$18.00
Eucalyptus Spearmint Peak Candle Type

What a fresh, clean scent! This is a spot-on dupe of the Bath & Bodyworks fragrance. It's a wonderful blend of eucalyptus and minty spearmint. Relaxing and soothing!

 

* Compare our fragrance to Eucalyptus Spearmint® dupe by Peak Candle of Bath & Bodyworks scent.



Flashpoint:  196° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 8.03%Body Wash:8.03%Bath Bombs: 8.03%
Body Lotion: 0.06%Body Scrub: 8.03%Candles: 100%
Perfume: 0.06%Deodorant: 0.06%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$18.00
Fireside Peak Candle Type

This fragrance is like the Yankee type.  It's like sitting by a campfire on a cool autumn evening. Very relaxing and peaceful. Made for candles but skin safe up to .02%.

 

* Compare our fragrance to Fireside® dupe by Peak Candle.


Flashpoint:  185° F
Vanilla Content:  3.06 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 0.79%Body Wash:0.79%Bath Bombs: 0.79%
Body Lotion: 0.02%Body Scrub: 0.79%Candles: 100%
Perfume: 0.02%Deodorant: 0.02%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$18.00
Freesia Peak Candle Type

An amazing spring scent! Sharp freesia flower scent is combined with warm lilac for a perfect blend. Made for candles but skin safe. Please consult the IFRA information below.

 

* Compare our fragrance to Freesia® dupe by Peak Candle.


Flashpoint:  >200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Not Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 11.11%Body Wash:11.11%Bath Bombs: 11.11%
Body Lotion: 1.50%Body Scrub: 11.11%Candles: 100%
Perfume: 1.30%Deodorant: 1.30%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$18.00
French Vanilla & Amber Peak Type

Such a warm and inviting scent! Delicious vanilla combined with warm amber and soft wood notes. Formulated for candles but skin safe up to 1.88%.

* Compare our fragrance to French Vanilla and Amber® dupe by Peak Candle.



Flashpoint:  > 200° F
Vanilla Content:  6.72 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 67.20 %Body Wash: 67.20 %Bath Bombs: 67.20 %
Body Lotion: 1.88%Body Scrub: 67.20 %Candles: 100%
Perfume: 1.88 %Deodorant: 1.88 %Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$19.00
Hot Chocolate Peak Candle Type

Chocolatey goodness!!! Smells like a hot cup of hot chocolate on a crisp winter night! When I tested this one in CP soap I experienced no acceleration or ricing. It does discolor - ALOT! My soap turned a lovely dark chocolate brown.

* Compare our fragrance to Hot Chocolate® by Peak Candle.



Flashpoint: > 200° F
Vanilla Content:  13.94 %
Country of Origin: USA
Phthalates: Not Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 8.33%Body Wash: 8.33%Bath Bombs: 8.33%
Body Lotion:8.33%Body Scrub: 8.33%Candles: 100%
Perfume: 3.33%Deodorant: 3.33%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

$18.00
Ivy & Hollyberry Peak Candle Type

A fresh green fragrance blended with ivy, red berries, and a touch of holiday sugar and spice. A holiday winner!



* Compare our fragrance to Hollyberry & Ivy ® by Peak Candle.


Flashpoint:  171° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 9.91%Body Wash: 9.91%Bath Bombs: 9.91%
Body Lotion: 0.01%Body Scrub: 9.91%Candles: 100%
Perfume: 0.01%Deodorant: 0.01%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Noir.

$18.00
Mountain Pine Peak Type

It's the strong pine scent of a mountain forest! Crisp and familiar.


* Compare our fragrance to Mountain Pine® by Peak Candle.



Flashpoint: 158° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Not Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 98.43 %Body Wash: 98.43 %Bath Bombs: 98.43 %
Body Lotion: 100 %Body Scrub: 98.43 %Candles: 100 %
Perfume: 96.15 %Deodorant: 25.00 %Lip: 0.00 %


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$18.00
Orange Ginger Fizz
Orange Ginger Fizz Peak Type

This one is gonna tickle your nose and delight your senses! Fizzy bubbles are coupled with a delicious blend of lime and mandarin orange. Warm notes merge with cloves and cinnamon with hints of vanilla. Spicy ginger rounds out this amazing fragrance. It's a tall glass of fizzy goodness! Made for candles but skin safe up to .02%.


* Compare our fragrance to Orange Ginger Fizz® by Peak Candle.



Flashpoint: 190° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Not Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap:  0.28 %Body Wash: 0.28 %Bath Bombs: 0.28 %
Body Lotion: 0.02 %Body Scrub: 0.28 %Candles: 100 %
Perfume: 0.02 %Deodorant: 0.02 %Lip: 0 %


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$18.00
Pumpkin Caramel Latte Peak Type

Who doesn't love a good cup of pumpkin caramel latte on a crisp fall day? It's a rich scent of caramel coupled with pumpkin spice and sweet cream all in a bold latte scent. It's the perfect way to start the day! Made for candles but skin safe up to 0.75%.

* Compare our fragrance to Pumpkin Caramel Latte® by Peak Candle.



Flashpoint: >200 ° F
Vanilla Content:  4.00 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 0.77 %Body Wash: 0.77 %Bath Bombs: 0.77 %
Body Lotion: 0.75 %Body Scrub: 0.77 %Candles: 100 %
Perfume: 0.00 %Deodorant: 0.31 %Lip: 0.00 %


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$18.00
Spruceberry Peak Candle Type

Spruceberry is a holiday favorite! It's a bold blend of raspberries, wild cranberries and winter cut spruce. Lemon zest, sprigs of mint and grapefruit intensify the cool freshness. Everyone loves this one! This fragrance is forumlated for candles but is skin safe up to 0.02%.

* Compare our fragrance to Spruceberry® dupe by Peak Candle.



Flashpoint:  158° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 27.17%Body Wash: 27.17%Bath Bombs: 27.17%
Body Lotion: 0.02%Body Scrub: 27.17%Candles: 100%
Perfume: 0.02%Deodorant: 0.02%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$20.00
Strawberry Fields Peak Candle Type

Imagine yourself sitting in the center of a huge strawberry field on a warm spring day. This is how I describe this fragrance. It has just the right amount of sweetness, balanced out by the tart, crisp notes of green apples and grapes. Gardenia, orris, and subtle ground clove notes help to mellow the scent and prove it irresistible. This fragrance is formulated for candles but is skin safe up to 10.0%.

* Compare our fragrance to Strawberry Fields® dupe by Peak Candle.



Flashpoint:  > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 11.54%Body Wash: 11.54%Bath Bombs: 11.54%
Body Lotion: 32.32%Body Scrub: 11.54%Candles: 100%
Perfume: 20.54%Deodorant: 5.08%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$18.00
vanilla bean nectarine
Vanilla Bean Nectarine Peak Type

A super molecular clone of the Peak Candle fragrance. You have juicy nectarines served over a warm vanilla bean base. It's really yummy!

* Compare our fragrance to Vanilla Bean Nectarine by Peak Candle.

Flashpoint: > 200° F
Vanilla Content:  0.30 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 46.97%Body Wash: 46.97%Bath Bombs: 46.97%
Body Lotion: 0.01%Body Scrub: 46.97%Candles: 100%
Perfume: 0.01%Deodorant: 0.01%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candle.

$18.00
Warm Apple Pie Peak Candle Type

This is the scent of apple pie just out of the oven and cooling on the window sash while a light breeze wafts the delicious smell of apples and cinnamon. Mouthwatering and delicious!!!  This fragrance is formulated for candles but is skin safe up to 2.50%.

* Compare our fragrance to Warm Apple Pie® dupe by Peak Candle.



Flashpoint:  > 200° F
Vanilla Content:  0.48 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 8.39%Body Wash: 8.39%Bath Bombs: 8.39%
Body Lotion: 2.50%Body Scrub: 8.39%Candles: 100%
Perfume: 2.50%Deodorant: 2.50%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$18.00
Wild Mountain Honey Peak Type

This is an exact dupe of Peak Candle's Wild Mountain Honey. So smooth and sweet! An awesome honey fragrance abundant with a mixed bouquet of wildflowers. It's a soothing blend of raw honey, orange blossoms and exotic ylang ylang. It's a best-seller in candles and requested by many people - so here it is!

* Compare our fragrance to Wild Mountain Honey ® by Peak Candle


Flashpoint: > 200° F
Vanilla Content:  1.50 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 25.00%Body Wash: 25.00%Bath Bombs: 25.00%
Body Lotion: 0.37%Body Scrub: 25.00%Candles: 100%
Perfume: 0.37%Deodorant: 0.37%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candle.

$21.00
Per Page      1 - 20 of 20
  • 1